Decal install...

I thought I'd pass along my experience in applying the BMMC window Decals....

The prototype.. didn't go as well as planned for many people including me. The "Mustang Club of Tulsa" lettering didn't stick all that great.

On Sunday, I applied the latest version to the official BMMC Support Vehicle (the wife's Edge) and had much better results! I did it dry....

Here's what I did:
Step 1) Clean the window surface absolutely spotless!
Step 2) Position the decal (with the front face removed obviously) and slightly apply pressure with your hand in the middle on the decal.
Step 3) Using a decal squeegee... work your way out from the middle of the decal to the edges. Apply a lot of pressure and make sure to get all of the air space between the decal and backing. DO NOT USE WATER OR ANY SOLUTION! I think this killed the adhesive on the first ones.
Step 4) At a 45 degree angle, start at one corner and slowly pull the backing off. SLOWLY! Try to pull the backing off at as much of an opposite angle as possible. Like you pull back the covers on a bed.

This method worked great for me. All the letters seem to be much more secure!

Good luck. Hope this helps!

Where can I get this infamous decal?

You can have Jarrod's...

You can buy one ($5) from me next time you join us for an outting.

+1 on Paul's install tips. I installed mine at the BHF Tech Day (glad we had a tech day scheduled; would have been weeks 'til I could have installed it otherwise); I cleaned off the glass first, firmly squeegeed all the air out after applying it to the windshield and then let it sit in the sun for 20 minutes. Slowly peeled off the backing while pressing down on the lettering in front of where I was peeling off the backing; so far so good - looks great!

Good tips. Hope to do mine this weekend some time.

was LOL at groupset comment "would have taken weeks to install it otherwise" then i thought should have put mine on at tech day also (as it is still not on my car yet )

I'm here all week; two shows on Friday.

What David...no pics?? Lets see the results

let me make them for you and I will put them on for free!!

where are you getting your decals from?

Hey thats right....Ronnys got the Sign connection....this will come in handy with future events.

Ronny the club will definitely be in touch

Grabber07' wrote:Hey thats right....Ronnys got the Sign connection....this will come in handy with future events.

Ronny the club will definitely be in touch

Revit wrote:where are you getting your decals from?

Chris will have to answer that....Not sure where he got them made

SPARTAN SIGNS HE DOES ALL THE LETTERING ON OUR CRANES AND TRUCKS.

We do need a new Banner!

2006GT wrote:We do need a new Banner!

What size?

NEEDFORSPEED wrote:SPARTAN SIGNS HE DOES ALL THE LETTERING ON OUR CRANES AND TRUCKS.

have not heard of them. Where are they located?

BIXBY, HE IS ALSO A BIXBY FIREMAN.

something like 3' x 4' We hang it up at all shows, events etc.

I'd really have to measure.

Paul is affraid of measuring.......it hurts his confidence every time