gear install

Post new topic   Reply to topic

Page 3 of 3 Previous  1, 2, 3

View previous topic View next topic Go down

Re: gear install

Post by DBLDARE on May 14th 2009, 3:38 pm

George if your going to get blown soon then I would do the 373's if your staying NA perhaps a 410 would be the better choice. Is that max redline with a tune? or is that the factory rev limit?

_________________
2006 Performance White GT
C&L Racer CAI, SCT With tunes by BRENSPEED, Steeda UDP's, Steeda CMCV Delete Plates, Pypes O/R H-Pipe, Flowmaster Mufflers, FRPP 410 Gears, Steeda Tri-Ax Shifter, Dennys One Piece Drive Shaft, Steeda LCA's, UPR Swaybar Delete Brace, Steeda Ultra Light Springs, BFG Drag Radials.


Best 1/4 Mile 12.39 @ 110.38 MPH

praemunio pacis est paro pro bellum

DBLDARE
BMMC Board Member
BMMC Board Member

Number of posts: 5624
Location: Catoosa Oklahoma
Car Type: 2006 Mustang GT
First Name: David
Registration date: 2008-03-11

View user profile

Back to top Go down

Re: gear install

Post by Black08_427R on May 14th 2009, 6:07 pm

DBLDARE wrote:George if your going to get blown soon then I would do the 373's if your staying NA perhaps a 410 would be the better choice. Is that max redline with a tune? or is that the factory rev limit?


David, are you stating that George will get blown with 373s?

_________________

Yeah, its fast... No, you can't drive it!!!

Mods?!? Its a Roush, of course its modded!
2008 427R #08-319
ROEA Member #A-738

Black08_427R
Gold Member
Gold Member

Number of posts: 1503
Age: 27
Location: Tulsa, OK
Car Type: 2008 427R
First Name: Dein
Registration date: 2009-01-18

View user profile

Back to top Go down

Re: gear install

Post by pony74055 on May 14th 2009, 7:11 pm

DBLDARE wrote:George if your going to get blown soon then I would do the 373's if your staying NA perhaps a 410 would be the better choice. Is that max redline with a tune? or is that the factory rev limit?


I have no rev limiter with my tune it is self inflicted redline before my piston and rods get a divorce if I leave it in drive the shift points are at 6200 in a chosen gear like 2nd or 3rd the sky is the limit literally.

pony74055
BMMC GT
BMMC GT

Number of posts: 481
Age: 33
Location: Owasso
Car Type: 2006 Redfire Metallic
First Name: George
Registration date: 2008-04-26

View user profile

Back to top Go down

Re: gear install

Post by DBLDARE on May 14th 2009, 7:18 pm

So I take it you have an auto car? With an auto I would say 373 is as high as you want to go.

_________________
2006 Performance White GT
C&L Racer CAI, SCT With tunes by BRENSPEED, Steeda UDP's, Steeda CMCV Delete Plates, Pypes O/R H-Pipe, Flowmaster Mufflers, FRPP 410 Gears, Steeda Tri-Ax Shifter, Dennys One Piece Drive Shaft, Steeda LCA's, UPR Swaybar Delete Brace, Steeda Ultra Light Springs, BFG Drag Radials.


Best 1/4 Mile 12.39 @ 110.38 MPH

praemunio pacis est paro pro bellum

DBLDARE
BMMC Board Member
BMMC Board Member

Number of posts: 5624
Location: Catoosa Oklahoma
Car Type: 2006 Mustang GT
First Name: David
Registration date: 2008-03-11

View user profile

Back to top Go down

Re: gear install

Post by 2006GT on May 14th 2009, 8:39 pm

George... you have an auto and road racing it?

_________________

2006 GT Prem. Manual. Vista Blue
President/ Janitor of the *BOLD MOVES MUSTANG CLUB OF TULSA* FOR INFORMATION ON JOINING THE CLUB PLEASE SEND US AN E-MAIL boldmovestulsa@gmail.com

2006GT
BMMC Board Member
BMMC Board Member

Number of posts: 9138
Age: 43
Location: Tulsa
Car Type: 2006 Mustang GT
First Name: Paul
Registration date: 2008-03-09

View user profile

Back to top Go down

Re: gear install

Post by 1 fast 8 on May 14th 2009, 11:50 pm

pony74055 wrote:
DBLDARE wrote:George if your going to get blown soon then I would do the 373's if your staying NA perhaps a 410 would be the better choice. Is that max redline with a tune? or is that the factory rev limit?


I have no rev limiter with my tune it is self inflicted redline before my piston and rods get a divorce if I leave it in drive the shift points are at 6200 in a chosen gear like 2nd or 3rd the sky is the limit literally.
i am not sure why u dont have a rev limiter. rev limiter is your freind id have it tuned in.nothing good happens at too many rpms

1 fast 8
2009 Mustang Challenge Champ!
2009 Mustang Challenge Champ!

Number of posts: 1587
Age: 45
Location: owasso
Car Type: 2008 gt
First Name: kelley
Registration date: 2008-10-15

View user profile

Back to top Go down

Re: gear install

Post by Guest on May 15th 2009, 9:39 am

1 fast 8 wrote:
pony74055 wrote:
DBLDARE wrote:George if your going to get blown soon then I would do the 373's if your staying NA perhaps a 410 would be the better choice. Is that max redline with a tune? or is that the factory rev limit?


I have no rev limiter with my tune it is self inflicted redline before my piston and rods get a divorce if I leave it in drive the shift points are at 6200 in a chosen gear like 2nd or 3rd the sky is the limit literally.
i am not sure why u dont have a rev limiter. rev limiter is your freind id have it tuned in.nothing good happens at too many rpms


Yes it does. You get to tell the wifey that the motors broke and you need an all forged motor. beerdrink

Guest
Guest


Back to top Go down

Re: gear install

Post by Bite Me on May 15th 2009, 12:58 pm

05SatinGT wrote:
1 fast 8 wrote:
pony74055 wrote:
DBLDARE wrote:George if your going to get blown soon then I would do the 373's if your staying NA perhaps a 410 would be the better choice. Is that max redline with a tune? or is that the factory rev limit?


I have no rev limiter with my tune it is self inflicted redline before my piston and rods get a divorce if I leave it in drive the shift points are at 6200 in a chosen gear like 2nd or 3rd the sky is the limit literally.
i am not sure why u dont have a rev limiter. rev limiter is your freind id have it tuned in.nothing good happens at too many rpms


Yes it does. You get to tell the wifey that the motors broke and you need an all forged motor. beerdrink


Good thinking. I like the way you think.

Bite Me
BMMC V6 Member
BMMC V6 Member

Number of posts: 83
Age: 27
Location: Broken Arrow
Car Type: 01 black Cobra
First Name: Josh
Registration date: 2009-05-11

View user profile

Back to top Go down

Re: gear install

Post by pony74055 on May 15th 2009, 5:47 pm

2006GT wrote:George... you have an auto and road racing it?


Why not F-1 cars are all auto's , hey when I say I am good trust me I can make a toaster go fast around corners. Seriously one of my only talents in life is I can drive the wheels off anything. I know that sounds like BS but hey it is very good BS and it's mine so it doesn't stink to me. poop

pony74055
BMMC GT
BMMC GT

Number of posts: 481
Age: 33
Location: Owasso
Car Type: 2006 Redfire Metallic
First Name: George
Registration date: 2008-04-26

View user profile

Back to top Go down

Re: gear install

Post by DBLDARE on May 15th 2009, 5:49 pm

EWWWWW!!!!

_________________
2006 Performance White GT
C&L Racer CAI, SCT With tunes by BRENSPEED, Steeda UDP's, Steeda CMCV Delete Plates, Pypes O/R H-Pipe, Flowmaster Mufflers, FRPP 410 Gears, Steeda Tri-Ax Shifter, Dennys One Piece Drive Shaft, Steeda LCA's, UPR Swaybar Delete Brace, Steeda Ultra Light Springs, BFG Drag Radials.


Best 1/4 Mile 12.39 @ 110.38 MPH

praemunio pacis est paro pro bellum

DBLDARE
BMMC Board Member
BMMC Board Member

Number of posts: 5624
Location: Catoosa Oklahoma
Car Type: 2006 Mustang GT
First Name: David
Registration date: 2008-03-11

View user profile

Back to top Go down

Re: gear install

Post by Guest on May 15th 2009, 6:14 pm

scary George just scary

Guest
Guest


Back to top Go down

Re: gear install

Post by Guest on May 15th 2009, 8:48 pm

pony74055 wrote:
2006GT wrote:George... you have an auto and road racing it?


Why not F-1 cars are all auto's , hey when I say I am good trust me I can make a toaster go fast around corners. Seriously one of my only talents in life is I can drive the wheels off anything. I know that sounds like BS but hey it is very good BS and it's mine so it doesn't stink to me. poop



TO be fair...the F-1 cars are hardly a normal Automatic lol! They are semi-automatic using Paddle mounted shifters....so basically a stick car...shifting is as seamless as a tranny but the choice of gear is chosen by the driver...computer does not shift for them or limit them.

A little tid bit of info about the Formula trannys:


"Formula One cars use semi-automatic sequential gearboxes with six or seven forward gears and one reverse gear. The driver initiates gear changes using paddles mounted on the back of the steering wheel and electro-hydraulics perform the actual change as well as throttle control. Clutch control is also performed electro-hydraulically except from and to a standstill when the driver must operate the clutch using a lever mounted on the back of the steering wheel."

Guest
Guest


Back to top Go down

Re: gear install

Post by Guest on May 15th 2009, 10:43 pm

not the same George. For road racing a stick is a must. For drag racing an auto is ok for brackets

Guest
Guest


Back to top Go down

Re: gear install

Post by pony74055 on May 15th 2009, 11:01 pm

Hey I run what I got and I don't make excuses if I don't go as fast as I think I should. Best Mod in the world a good driver damn I just thought about something is this board really big enough for my ego???
allhail

I crack me up sometimes.

pony74055
BMMC GT
BMMC GT

Number of posts: 481
Age: 33
Location: Owasso
Car Type: 2006 Redfire Metallic
First Name: George
Registration date: 2008-04-26

View user profile

Back to top Go down

Re: gear install

Post by Guest on May 15th 2009, 11:08 pm

oh brother. LOL

Guest
Guest


Back to top Go down

Re: gear install

Post by 1 fast 8 on May 15th 2009, 11:08 pm

we were thinking the same thing

1 fast 8
2009 Mustang Challenge Champ!
2009 Mustang Challenge Champ!

Number of posts: 1587
Age: 45
Location: owasso
Car Type: 2008 gt
First Name: kelley
Registration date: 2008-10-15

View user profile

Back to top Go down

Re: gear install

Post by Guest on May 17th 2009, 1:01 pm

thud

Guest
Guest


Back to top Go down

Re: gear install

Post by Bite Me on May 18th 2009, 9:37 am

You guys crack me up.

Bite Me
BMMC V6 Member
BMMC V6 Member

Number of posts: 83
Age: 27
Location: Broken Arrow
Car Type: 01 black Cobra
First Name: Josh
Registration date: 2009-05-11

View user profile

Back to top Go down

Page 3 of 3 Previous  1, 2, 3

View previous topic View next topic Back to top


Permissions of this forum:
You cannot reply to topics in this forum