new exhaust
Page 1 of 1 • Share •
new exhaust
by fishpig on February 22nd 2009, 1:04 pm
just ordered SLP LMs... will be visiting Leon soon.
fishpig- BMMC V6 Member
- Number of posts: 69
Age: 34
Location: Owasso OK
Car Type: 2008 Mustang GT
First Name: Keith
Registration date: 2009-01-06 
Re: new exhaust
by 07Shelby500 on February 22nd 2009, 1:16 pm
Congrats Keith!
_________________
'07 Shelby GT500
07Shelby500- BMMC Board Member
- Number of posts: 9049
Age: 36
Location: Owasso Oklahoma
Car Type: The thing which must not be spoken of
First Name: David
Registration date: 2008-03-10 -
Re: new exhaust
by fishpig on February 22nd 2009, 1:32 pm
that reminds me... i think i spotted your car at Lenny's last week. right?
fishpig- BMMC V6 Member
- Number of posts: 69
Age: 34
Location: Owasso OK
Car Type: 2008 Mustang GT
First Name: Keith
Registration date: 2009-01-06 -
Psycho Bob- BMMC Post Pig Member
- Number of posts: 1639
Age: 34
Location: Tulsa/FT. Carson, CO
Car Type: 07 GT
First Name: Bob
Registration date: 2008-10-09 -
Re: new exhaust
by Leonard 95 on February 22nd 2009, 1:57 pm
Yea, all you need is 13mm wrench/socket and 15mm deep socket.
Leonard 95- BMMC Elite Post Pig Member
- Number of posts: 2890
Age: 36
Location: Bixby
Car Type: 08 GT500
First Name: David
Registration date: 2008-12-09 -
Re: new exhaust
by 07Shelby500 on February 22nd 2009, 2:01 pm
fishpig wrote:that reminds me... i think i spotted your car at Lenny's last week. right?
Thats correct. Was having lunch with Grabber07 (Jarrod), 2006GT (Paul), and 03.sonicblue (Jerry)
_________________
'07 Shelby GT500
07Shelby500- BMMC Board Member
- Number of posts: 9049
Age: 36
Location: Owasso Oklahoma
Car Type: The thing which must not be spoken of
First Name: David
Registration date: 2008-03-10 -
Re: new exhaust
by Guest on February 22nd 2009, 2:51 pm
No need for Leons for the SLPs.....just a couple of bolts and your done
Guest- Guest
fishpig- BMMC V6 Member
- Number of posts: 69
Age: 34
Location: Owasso OK
Car Type: 2008 Mustang GT
First Name: Keith
Registration date: 2009-01-06 -
Re: new exhaust
by BMMC1 on February 22nd 2009, 5:32 pm
Are ya sure??? The clamps should do it. Plus if you decide you don't want them.... you just unbolt them.
_________________
2011 GT500... NO BOAT ANCHORS!
President/ Janitor of the *BOLD MOVES MUSTANG CLUB OF TULSA* FOR INFORMATION ON JOINING THE CLUB PLEASE SEND US AN E-MAIL boldmovestulsa@gmail.com
"How old is your soul?"
BMMC1- BMMC Board Member
- Number of posts: 13746
Age: 45
Location: Tulsa
Car Type: 2011 Shelby GT500
First Name: Paul The DILF
Registration date: 2008-03-09 -
Re: new exhaust
by Leonard 95 on February 22nd 2009, 6:15 pm
Yea, I wouldn't weld them on, just creates a pita if you ever have to take exhaust off, fuel tank, etc. Just bolt them up and be done.
Leonard 95- BMMC Elite Post Pig Member
- Number of posts: 2890
Age: 36
Location: Bixby
Car Type: 08 GT500
First Name: David
Registration date: 2008-12-09 -
Re: new exhaust
by fishpig on February 22nd 2009, 6:54 pm
hrmm well, what's this all about (from AmericanMuscle.com):
In 2007, Ford changed the style of exhaust hanger used to install the
stock exhaust on the new S197 Mustangs. They switched from a "rubber
and steel" hanger design to an "all rubber" hanger, which will not work
correctly with the after-market cat-back exhaust systems on the market.
The Pypes 2005+ Mustang 304 Stainless Steel Exhaust Hangers
will allow you to install any 2005+ after-market cat-back correctly on
a 2007 or newer Ford Mustang. We recommend that you add this to your
order from the drop-down menu when you purchase your cat-back or
axle-back exhaust.
In 2007, Ford changed the style of exhaust hanger used to install the
stock exhaust on the new S197 Mustangs. They switched from a "rubber
and steel" hanger design to an "all rubber" hanger, which will not work
correctly with the after-market cat-back exhaust systems on the market.
The Pypes 2005+ Mustang 304 Stainless Steel Exhaust Hangers
will allow you to install any 2005+ after-market cat-back correctly on
a 2007 or newer Ford Mustang. We recommend that you add this to your
order from the drop-down menu when you purchase your cat-back or
axle-back exhaust.
fishpig- BMMC V6 Member
- Number of posts: 69
Age: 34
Location: Owasso OK
Car Type: 2008 Mustang GT
First Name: Keith
Registration date: 2009-01-06 -
Re: new exhaust
by Leonard 95 on February 22nd 2009, 7:49 pm
I don't know what that is all about, I just installed a used set of loudmouths from Hector on my 08 and had no problems whatsoever. Used all the stock hangers.
Leonard 95- BMMC Elite Post Pig Member
- Number of posts: 2890
Age: 36
Location: Bixby
Car Type: 08 GT500
First Name: David
Registration date: 2008-12-09 -
Re: new exhaust
by fishpig on February 22nd 2009, 7:58 pm
yea, that's what i'm reading... not needed. well you guys talked me into it. guess i'll tackle that on saturday.
fishpig- BMMC V6 Member
- Number of posts: 69
Age: 34
Location: Owasso OK
Car Type: 2008 Mustang GT
First Name: Keith
Registration date: 2009-01-06 -
Re: new exhaust
by Guest on February 22nd 2009, 8:23 pm
Thats what we are here for Keith!! Good call on not welding!
Guest- Guest
Re: new exhaust
by Psycho Bob on February 23rd 2009, 1:40 am
2007 and i just bolted mine up with all the stock stuff
Psycho Bob- BMMC Post Pig Member
- Number of posts: 1639
Age: 34
Location: Tulsa/FT. Carson, CO
Car Type: 07 GT
First Name: Bob
Registration date: 2008-10-09 -
fishpig- BMMC V6 Member
- Number of posts: 69
Age: 34
Location: Owasso OK
Car Type: 2008 Mustang GT
First Name: Keith
Registration date: 2009-01-06 -
Re: new exhaust
by Guest on February 28th 2009, 2:30 pm
We need a video clip now!! How long did the install take?
Guest- Guest
Re: new exhaust
by fishpig on March 1st 2009, 1:37 pm
Grabber07' wrote:We need a video clip now!! How long did the install take?
i know guys around here say it only takes an hour but it probably took me 3.5 hours. some of the bolts for the hangars were damn near impossible to get to so i had to figure that all out. also, one of the tips' hanger needed to be adjusted (bent) so it would have the right clearance in the bumper cutout. all in all it wasn't bad though... one of the more enjoyable times i've had working on a car, probably because of the result.
fishpig- BMMC V6 Member
- Number of posts: 69
Age: 34
Location: Owasso OK
Car Type: 2008 Mustang GT
First Name: Keith
Registration date: 2009-01-06 -
Re: new exhaust
by Leonard 95 on March 1st 2009, 2:24 pm
The right tools make the job alot easier, really all the 13mm bolts can be had with a 1/4 air ratchet. The one above the muffler needs to be the last one taken off since you can pull it down to get access to it.
Leonard 95- BMMC Elite Post Pig Member
- Number of posts: 2890
Age: 36
Location: Bixby
Car Type: 08 GT500
First Name: David
Registration date: 2008-12-09 -
Re: new exhaust
by Guest on March 1st 2009, 5:58 pm
Davids right....with air tools...everythings made easy hehe and a lift.....
Guest- Guest
Re: new exhaust
by ARMORINE on March 3rd 2009, 10:48 pm
fishpig wrote:i want the joints welded.
lol didnt read the whole post [url=http://www.boldmovestulsa.com/javascript:emoticonp('
')][/url]you'll like them but eventually you'll want to install a better system
ARMORINE- Paul's 2 Star Atta-Boy Award!
- Number of posts: 3697
Age: 23
Location: Tulsa, Oklahoma
Car Type: Shelby GT
First Name: Jared
Registration date: 2008-04-01 -
Similar topics» Factory WR250X exhaust
» Blowing exhaust
» exhaust tips for stock exhaust......
» exhaust specialists?
» DOOE-R Heads / exhaust port plates
» Blowing exhaust
» exhaust tips for stock exhaust......
» exhaust specialists?
» DOOE-R Heads / exhaust port plates
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum