Forged Internals from Livernois

Thought this might be a good deal....David here you go

http://www.livernoismotorsports.com/product.phtml?p=1552

Just read on another forum that BBR can get you into a complete Forged Shortblock for $3000

With a Core of course

Here is JDMs response

We offer completly built short and longblocks here at our facility. The shortblock consists of a new 05+ aluminum block, steel forged 3.750" stroker crank, manley h beam rods, Manley forged pistons with stock 9.8:1 compression, high performance rings and bearings, ARP 3v main studs. Most companies cheap out on the main studs and use the 2v/4v studs. We use the correct 3v studs so you can retain your factor windage tray.

Our longblocks come with that same stroker shortblock underneath a set of Stage 3 CNC ported 3v heads, new Manley valves, Manley springs, manley ti retainers, new seals, and comp cams. The longblock is also full timed with all new components and cam phasers. These come with a 1 year no detonation warranty and can withstand 900 HP!

The pricing on these exact builds are as follows...

$5295 shortblock
$12595 longblock
No Core Necessary but we will deduct $500 for a block and $800 for a set of heads.

Everything is brand new and is as described above. We at Team JDM have provided an engine building service for modular motors for over 15 years now! There are not that many companys who have even been in buisness that long let alone building motors like these!!

You or anyone can call on us anytime to discuss building one of these engines! Since we keep the shortblocks and heads in stock we can ship a shortblock same day and a longblock with in 4-5 buisness days!!

Call us at 732-780-0770 or reach us on the web at www.TeamJDM.com

Do you guys work over there at Hilti?

We work in proportion to the amount we get paid

03.sonicblue wrote:We work in proportion to the amount we get paid

Well played...

Jerry speaks the truth

03.sonicblue wrote:We work in proportion to the amount we get paid

So does that mean you only work 8 hours in a week!

MUSTANG GT SALEEN SUPER SHAKER SUPERCHARGER (05-08)
MUSTANG GT SALEEN SUPER SHAKER SUPERCHARGER (05-08)





SALEEN SUPER SHAKER SUPERCHARGER
Series VI integrated Twin Screw supercharger with two-stage water-to-air intercooling system.
FITS 05-2009 MUSTANG GT

The Saleen SpeedLab Super Shaker represents a breakthrough in design and engineering. In the past, hood shakers were purely cosmetic and did nothing to enhance performance. Saleen’s revolutionary product rams cold air to a supercharger, which maximizes power. This is the first of its kind, and will bring a noticeable difference to both the design of the vehicle as well as performance.

In our opinion the Saleen twin screw supercharger is the most reliable supercharger system for the money. Now with the addition of its one of a kind shaker induction you not only get power but also address appearance (and sound) as well. This supercharger system is an OEM Saleen produced supercharger package. It will add 150 rear wheel horsepower and 140 rear wheel torque and is delivered to you with everything needed to install and start the vehicle.

The Saleen has a unique design with a twin screw blower assembly that will push air directly into the combustion chamber. It is compact, light weight, and highly efficient. The blower housing, assembly and intercooler in one compact units nestles neatly in the valley between your cylinder heads. This Saleen supercharger package benefits from a Saleen power flash performance computer. A pre-labeled box is included so you can next day air your PCM to Saleen for a proper computer calibration. Brenspeed is an authorized Speedlab installation facility with installation starting at only $850! Allow Brenspeed to install this package and keep your factory 3 year 36,000 mile warranty!Any one have any thoughts on this unit,Tony
Cany

Pretty nice blower setup there!

I am working a deal with them.I should hear from them on mon.This would have to be done in the next two weeks for the maa and 45th event.

tony if you get that i will be (accidentally) trying to get in you car

Can't decide if i want the shaker.It would save me 1200 bucks but lose 20hp.It would be more of a sleeper without it.

$1200 goes along way in other parts you may need like fuel system stuff.

Awesome Tony!!! I too want the Super Shaker!!! If you get it I want a ride!!!

I say get the shaker...looks amazing from the exterior and even more impressive when you pop the hood...WHY? because there are only a few that have it in the country.

I think that kit comes with a fuel system if Im not mistaken also.

BUT others are right...if you just get the blower and save yourself $1200 that could go to suspension or in your pocket.

livernois will be my choice i'm pretty sure. probably the best customer service you can get. they also have a 323ci now also. kinda pricy though. personally i would like to use the frpp boss block rather than the stock 4.6 block.

The shaker is on back order.They did offer me a stage 3 up grade,150 for gas,the guest house,and 200 off for using cash.I may look at the roush or kenny bell since i can get them local.I also have to use my stock intake pipe for the saleen and i think they are ugly.If i do go anyone up for some driving.It is 11 hours up.I would leave next thur. morning,they do the install and dyno fri. and back on sat.

I forgot,they cannot use my hood for the supershaker.The holes from the fake scoop will show.Used hoods run around 650 bucks.They are high because of the vista blue paint. I could probably find some one to trade.The more i think about it going in stealth mode might be more fun and i could use the extra money to get the 450 rwhp to the ground.

Here is what I would do, buy whatever online out of state so you don't have to pay sales tax. That would save you a easy 300 bucks, then I would have Greg install it for you with the money you saved on tax. I would think most of these blowers have a base tune, maybe not, if not then Greg could tune it also for you and you wouldn't have to drive anywhere.

Now tony when you say Roush...your talking the TVS blower right?

Yes,GRASSHOPPER

carcrazy53 wrote:Yes,GRASSHOPPER

you might as well just give me that hood you will never be able to find someone else with the rare vista blue

There are 630 cars on the MAA going to ala.Which color and what year car has the most entries.GIVE THE MAN A CIGAR.It's 07 vista blue,with 25 cars.

Let us know what you decide Tony...thats going to be one sweet ride!!

I am ready,the clutch went in this weekend,pain in the ass working alone.

my question is why pay someone else to do the install on something that can be done in one weekend with a basic tool set. if you get the KB they provide a tune with it if you aren't against using the baps and their canned tune.

oh and for everyone's info. my engine/trans is ready to be pulled. going to pickup the cherry picker and engine stand tomorrow.

yea the guy prob installed his nos that went at the dyno day

Psycho Bob wrote:my question is why pay someone else to do the install on something that can be done in one weekend with a basic tool set. if you get the KB they provide a tune with it if you aren't against using the baps and their canned tune.

oh and for everyone's info. my engine/trans is ready to be pulled. going to pickup the cherry picker and engine stand tomorrow.

Good luck

Good Luck X 2