Installed the sequential tail lights today

Took less than 30 minutes. Just swapped out the OEM harness. Really easy! And it looks sweet too.

Got them from WebElectric (http://www.webelectricproducts.com/) for $119 (free shipping too). If you're thinking about doing this mod, I'd highly recommend them.

Here's something I've always wondered about, and it came up again today: If the Mustangs (going all the way back to the SN95s) have three sockets and three two-way bulbs, why doesn't Ford set them up so that they ALL come on when braking or using the turn signal? I don't get that. With this new harness, they do (obviously with the turn signal).

Very cool Steve.

I installed these on mine about a year ago and as you say very easy task. I think the 2010 models have this as standard. Looks cool when you brake doesn't it? The older Birds and Cougars had sequential lights.

Awwwwwww. Stevies first mod!

What's next?! (say turner and CAI)

Speaking of mods, I'm having Steeda springs installed Friday. Not sure why but have been pretty excited about the change in the stance of the car.

2006GT wrote:Awwwwwww. Stevies first mod!

What's next?! (say tuner and CAI)

Ha ha! Yes, that is in my car's future, just not sure when.

Oh, any tips for popping the end of the antenna off? I was going to shorten it yesterday but got frustrated.

GTMustang wrote:Speaking of mods, I'm having Steeda springs installed Friday. Not sure why but have been pretty excited about the change in the stance of the car.

Cool Bob. Make sure you post pics!

Very nice!

get a 2 inch antenna! like mine :P

^^2 inch is weak sauce get the lil numb off ebay like me and doc...closest to nothing.

And i love my sequentials just one of those to suprise some one with as the are drooling already

MusicMan66 wrote:

2006GT wrote:Awwwwwww. Stevies first mod!

What's next?! (say tuner and CAI)

Ha ha! Yes, that is in my car's future, just not sure when.

Oh, any tips for popping the end of the antenna off? I was going to shorten it yesterday but got frustrated.

Im pretty sure they just twist off at the base. Mine both do .

03.sonicblue wrote:

MusicMan66 wrote:

2006GT wrote:Awwwwwww. Stevies first mod!

What's next?! (say tuner and CAI)

Ha ha! Yes, that is in my car's future, just not sure when.

Oh, any tips for popping the end of the antenna off? I was going to shorten it yesterday but got frustrated.

Im pretty sure they just twist off at the base. Mine both do .

Thanks Jerry, but I meant the very tip (ball end). I tore that thing up a little, but was able to cover it up with some black paint.

Decided to just order a shorter antenna and will have it installed before the Jenks show.

MusicMan66 wrote:

03.sonicblue wrote:

MusicMan66 wrote:

2006GT wrote:Awwwwwww. Stevies first mod!

What's next?! (say tuner and CAI)

Ha ha! Yes, that is in my car's future, just not sure when.

Oh, any tips for popping the end of the antenna off? I was going to shorten it yesterday but got frustrated.

Im pretty sure they just twist off at the base. Mine both do .

Thanks Jerry, but I meant the very tip (ball end). I tore that thing up a little, but was able to cover it up with some black paint.

Decided to just order a shorter antenna and will have it installed before the Jenks show.

Ah, i must have mis heard ya

Very cool mod. I did mine about a year ago as well

Just run a vice grip plier down to where it's barely wider than the antenna thickness but smaller than the ball. Turn with the ball facing the floor (carpet or somthing to catch it) and hit the vice grip with a hammer. Ball is pressure fit and will pop off with the propper amount of force. Then shorten the antenna rod to desired length. Once shortened you will need to neck down the end again to be able to tap the ball back into place as the rod is tapered from the factory.

I really like the web electric products.... I purchased and installed the cheaper kit, the one that you install in the OEM harness.... They are awsome!

Black08_427R wrote:I really like the web electric products.... I purchased and installed the cheaper kit, the one that you install in the OEM harness.... They are awsome!

That's the same one I got. They were highly recommended on TMS.

I am planing on making front LED sequential turn signals.... I will let you guys know when I have them put together.....